Key takeaways
- Compare the best license plate frames for cars and trucks, from rust-proof silicone to stainless steel and carbon fiber, and find a slim, street-legal fit.
The best license plate frames protect a plate from rust, rattling, and road grime while giving the front or rear of a car a cleaner finish. For most drivers, the LivTee Carbon Fiber frames are the top pick, thanks to a stainless steel core, a carbon fiber look, and a slim four-hole design. The QUANQIUFEI stainless steel frames are the strongest value in metal, the two Aujen silicone frames are the quietest options, and the OKLPF aluminum frames are a solid budget pick.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- LivTee Carbon Fiber License Plate Frames
- QUANQIUFEI Stainless Steel License Plate Frames
- Aujen Silicone License Plate Frames, Black 2-Pack
- Aujen Silicone License Plate Frames, Side-Opening 2-Pack
- OKLPF Matte Black Aluminum License Plate Frames
- How to Choose a License Plate Frame
- Frequently Asked Questions
- Conclusion
LivTee Carbon Fiber License Plate Frames
The LivTee Carbon Fiber frames are the pick for drivers who want a sporty, premium look without moving to a custom or vehicle-specific frame. Each frame pairs a stainless steel body with a carbon fiber finish, so the frame reads as a performance accent while the metal underneath handles weather, car washes, and road debris. The polished finish and woven carbon pattern suit dark cars and trucks especially well.
This is a two-pack, so one set covers the front and rear plates of a single vehicle. The frames use a four-hole layout and a slim design with a gasket cover, which helps the frame sit flat against the plate and the mounting surface. Standard US plates measure 12 inches by 6 inches, and these frames are sized for that standard, at 6.41 inches by 12.4 inches overall. The model number is LivTee-PLP-5050-1W, and the polished finish gives the carbon pattern a glossy, finished look rather than a flat matte one.
It adds no logos or lettering, so it blends with nearly any paint color and trim level. Drivers who wash their cars often will appreciate that stainless steel resists rust and corrosion, and the carbon fiber finish adds scratch resistance to the visible face of the frame. Installation follows the usual pattern: remove the existing screws, set the plate in the frame, and fasten the frame to the vehicle with the included hardware.
- Specs
- Material: Stainless steel with a carbon fiber finish
- Finish: Polished
- Dimensions: 6.41 inches by 12.4 inches
- Pack size: 2 frames
- Mounting: 4-hole layout, slim design with gasket cover
- Model number: LivTee-PLP-5050-1W
- Fit: Standard US license plates
QUANQIUFEI Stainless Steel License Plate Frames
The QUANQIUFEI frames are a strong choice for drivers who want real stainless steel at a mid-range price point. The pair comes in black with a polished finish, and the stainless steel construction resists rust and corrosion through rain, snow, and road salt. Unlike plastic frames that can crack or fade after a few seasons, these hold their shape and finish with simple care.
Each frame measures 12.3 inches by 6.5 inches, sized for standard US plates, and the set includes the full mounting kit: screws, caps, a spanner, and washer seals. That matters more than it sounds, because a frame is only as good as its hardware. The included screw caps cover the fasteners for a finished look, while the washer seals help keep moisture out from behind the plate. The model number is QBTG001, with item model number BXG002.
The black finish disappears against dark bumpers and trim and pairs well with black wheels and grilles, while on lighter cars it creates a clear border that makes the plate look intentional. The polished surface also wipes clean easily after a drive through mud or slush.
For trucks and SUVs that see rougher use, the stainless steel body is a real advantage. It will not flex or warp the way thin plastic can, and it stands up to repeated removal when a plate needs to be transferred or replaced. This is the frame to choose when durability matters most and the budget does not stretch to a carbon fiber finish.
- Specs
- Material: Stainless steel
- Finish: Polished black
- Dimensions: 12.3 inches by 6.5 inches
- Pack size: 2 frames
- Included components: Frame, screws, caps, spanner, washer seals
- Model number: QBTG001
- Item model number: BXG002
- Fit: Standard US license plates
Aujen Silicone License Plate Frames, Black 2-Pack
The Aujen Silicone frames take a different approach: instead of metal, they use flexible silicone that wraps the edges of the plate. The result is a frame that cannot rust, cannot rattle, and will not scratch the paint behind the plate. For drivers who are annoyed by the buzzing sound a metal frame can make on rough roads, silicone solves the problem at the source.
This set, model US518, includes two black frames with a matte finish. Each frame measures 6.3 inches by 12.6 inches and weighs 150 grams, and the silicone material protects the plate from rust and damage while outlasting a basic plastic frame. The frames are built for universal fit on US plates, and a plastic installation tool is included to help slide the silicone edges over the plate during setup. Mounting screws are not included, so the existing vehicle screws are reused.
Silicone also stays flexible in cold weather, so it will not crack the way hard plastic can on a freezing morning, and it grips the plate gently, which reduces the vibration that can loosen screws over time.
The main trade-off is style. Silicone frames look clean and simple, but they do not have the shine or presence of polished metal. Drivers who want their car to stand out may prefer a metal or carbon fiber frame. Drivers who want a quiet, durable, low-maintenance frame that simply works will find this set hard to beat.
- Specs
- Material: Silicone
- Finish: Matte black
- Dimensions: 6.3 inches by 12.6 inches
- Item weight: 150 grams
- Pack size: 2 frames
- Model number: US518
- Manufacturer part number: US518BL
- Included: Plastic installation tool; mounting screws not included
- Fit: Universal fit for standard US license plates
Aujen Silicone License Plate Frames, Side-Opening 2-Pack
The second Aujen set in this roundup, model US535, keeps the same silicone construction and adds a side-opening design that makes installation noticeably easier. Instead of stretching the frame over the plate from the front, the side-opening bracket lets the plate slide in from the side, which is a welcome change for anyone who has struggled to fit a tight silicone frame.
Like the standard Aujen set, these frames are rust-proof, rattle-proof, and weatherproof, and the black silicone protects the plate from rust and damage. Each frame measures 6.3 inches by 12.3 inches and fits standard US plates. The set includes two frames, so one purchase covers the front and rear of a vehicle.
The side-opening design also makes removal simpler. When a plate needs to come off for renewal, a transfer, or a wash behind the plate, the frame comes away without a fight. That is a small detail, but it matters for drivers who change plates often or who like to clean behind the plate during a detail session.
In terms of looks, the US535 is nearly identical to the standard Aujen frame: matte black, clean edges, and no logos. The choice between the two Aujen sets comes down to installation preference. Drivers who want the easiest possible fit should pick the side-opening version, while drivers who want the lowest-profile silicone frame can pick the standard set. Either way, the silicone construction delivers the same quiet, rust-free performance.
- Specs
- Material: Silicone
- Finish: Matte black
- Dimensions: 6.3 inches by 12.3 inches
- Pack size: 2 frames
- Design: Side-opening bracket for easy installation
- Model number: US535
- Features: Rust-proof, rattle-proof, weatherproof
- Fit: Universal fit for standard US license plates
OKLPF Matte Black Aluminum License Plate Frames
The OKLPF frames are the budget pick in this roundup, and they cover the basics well. Made from aluminum with a matte black finish, the pair is light, rust-proof, and easy to install. Aluminum will not rust the way bare steel can, and the matte coating resists scratches and keeps the frame looking tidy between washes.
This is a two-hole set, which suits vehicles that use only the top two mounting screws. The frames come with screw caps, screws, and washers, so everything needed for installation is in the box. The model number is OK0552, and the frames are sized for standard US plates.
The matte black finish is the safest styling choice in the group. It works on any paint color, it does not draw attention to itself, and it matches black trim, grilles, and wheels. For a work truck, a commuter car, or a second vehicle, that understated look is often exactly right.
There are a few limits to note. Aluminum is lighter and softer than stainless steel, so it can bend if it takes a hard knock. The two-hole mounting also means the bottom of the frame is held only by the plate itself, which is normal for this style but worth knowing before buying. For everyday driving, though, these frames do the job at a budget price, and the included hardware means there is nothing extra to buy.
- Specs
- Material: Aluminum
- Finish: Matte black
- Pack size: 2 frames
- Mounting: 2-hole layout
- Included: Screw caps, screws, washers
- Model number: OK0552
- Fit: Standard US license plates
How to Choose a License Plate Frame
Start with material, because it decides how the frame ages. Stainless steel is the most durable choice and resists rust and corrosion for years. Aluminum is lighter and rust-proof but softer, so it can bend under impact. Silicone cannot rust at all, stays flexible in cold weather, and eliminates rattling, which makes it a strong pick for drivers who value quiet operation over shine. Plastic frames are the lightest and cheapest, but they can crack or fade with sun exposure.
Next, check the hole layout. Most US plates use either two holes along the top or four holes, two at the top and two at the bottom. A four-hole frame holds the plate more securely and keeps the bottom edge from flapping at highway speed, while a two-hole frame is simpler and works on vehicles that only have top mounting points. Match the frame to the mounting points on the vehicle, not just to the plate.
Pay attention to the frame profile as well. Slim frames sit close to the plate and are less likely to cover registration stickers or state names, which matters because many states require those details to stay visible. A frame that covers a sticker can lead to a fine, so a slim design is the safer choice. Frames with a wide bottom border look bold but can hide the registration month and year on some plates.
Finally, look at what comes in the box. A good set includes screws, washers, and caps, and some add a spanner or an installation tool. If the set does not include screws, the existing vehicle screws can usually be reused, but check the screw length, since a thicker frame may need longer fasteners. Anti-rattle pads or a gasket behind the frame are a bonus on trucks and SUVs that see rough roads.
Frequently Asked Questions
Will these frames fit my car?
Yes, if the vehicle uses standard US license plates measuring 12 inches by 6 inches. All five frames in this roundup are sized for that standard and use a universal fit. The main thing to check is the mounting layout: confirm whether the vehicle uses two or four screw holes, and pick a frame that matches.
Are silicone license plate frames durable?
Yes. Silicone frames resist rust, stay flexible in cold weather, and do not crack the way hard plastic can. They also cushion the plate, which stops rattling and protects the paint behind the plate. Their main limit is style, since they have a matte, understated look rather than a polished metal shine.
Do license plate frames block registration stickers?
A slim frame should not block registration stickers or state names, but a wide frame can cover them on some plates. Many states require stickers and plate details to stay fully visible, so choose a slim profile and check the fit after installation. If any sticker is covered, switch to a slimmer frame.
What hardware do I need to install a license plate frame?
Most sets include screws, washers, and caps, and some add a spanner or an installation tool. A standard screwdriver is usually the only tool needed. If a set does not include screws, the existing vehicle screws can be reused, as long as they are long enough to pass through the frame and engage the mounting threads.
Conclusion
The best license plate frame depends on what matters most: style, silence, or strength. The LivTee Carbon Fiber frames lead the roundup for drivers who want a premium look with a stainless steel core. The QUANQIUFEI stainless steel frames offer the best balance of durability and value, with a complete hardware kit in the box. The two Aujen silicone frames are the quietest options and the easiest on paint, with the side-opening version winning on installation. The OKLPF aluminum frames round out the list as a dependable budget pick with a clean matte black finish. Any of the five will fit a standard US plate, so the final choice comes down to material and mounting style.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!