Key takeaways
- Read our Skar Audio 1/0 Gauge OFC amplifier wiring kit review to see what is included, who it suits, and how it compares for powerful car audio builds.
A car amplifier can only perform as well as the wiring that feeds it. Thin power cable, a weak ground, or a missing fuse can limit output and cause voltage drop. The Skar Audio 1/0 Gauge OFC Complete Amplifier Installation Wiring Kit, model SKAR0ANL-OFC, is built for high-power installations, with thick oxygen-free copper cable and a full set of accessories in one box.
This review covers what the SKAR0ANL-OFC includes, who should choose it over a lighter 4-gauge or 8-gauge kit, and the limits to check before ordering, including cable lengths, fuse size, and amplifier fit.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Skar Audio SKAR0ANL-OFC is a complete 1/0-gauge oxygen-free copper amplifier wiring kit for systems up to 3,000 watts. It includes a 17-foot power cable, a 3-foot ground cable, twisted-pair RCA cables, remote turn-on wire, speaker wire, an in-line ANL fuse holder, and a 300 Amp ANL fuse. It suits powerful single-amplifier and multi-amplifier car audio builds where thick, low-resistance power cable is essential.
Key Specs
| Specification | Detail |
|---|---|
| Brand | Skar Audio |
| Model | SKAR0ANL-OFC |
| Type | Complete amplifier installation wiring kit |
| Gauge | 1/0 gauge power and ground cable |
| Material | Oxygen-free copper |
| System rating | Up to 3,000 watts |
| Power cable | 17 feet, matte blue |
| Ground cable | 3 feet, matte white |
| RCA cable | 17 feet, 2-channel twisted pair |
| Remote wire | 17 feet, matte blue |
| Speaker wire | 20 feet, 12 gauge |
| Fuse | 300 Amp ANL, in-line holder |
| Loom | 3 feet, black flex |
| Accessories | Ring terminals, zip ties |
| Warranty | Not stated |
What Is Included
The two cables that matter most come first. The 17-foot matte blue power cable runs from the battery to the amplifier, while the 3-foot matte white ground cable connects the amplifier to a nearby chassis ground point. Both use 1/0-gauge oxygen-free copper with a flexible jacket, which helps the cable bend around trim panels and seat brackets without kinking.
Signal and control wiring are covered as well. The 17-foot twisted-pair RCA cable carries audio from the head unit to the amplifier and helps reduce interference. A 17-foot remote turn-on wire tells the amplifier when to switch on, and 20 feet of 12-gauge speaker wire connects the amplifier output to a subwoofer or speakers. An in-line ANL fuse holder sits close to the battery, with a 300 Amp ANL fuse matched to the heavy cable. Black flex wire loom, ring terminals, and zip ties finish the kit.
Who It Is For
This kit suits drivers building a powerful car audio system. If the amplifier, or the combined amplifiers in the system, approach the upper end of the kit rating, thick 1/0-gauge cable helps deliver current with less resistance than a lighter kit. It also suits installers who want one purchase to cover power, ground, signal, remote turn-on, and speaker wiring.
It also fits larger vehicles where the battery and amplifier sit farther apart. The 17-foot power cable gives enough length for many sedan, SUV, and truck layouts. Owners planning a future upgrade may appreciate the headroom, since the same wiring can support a stronger amplifier later, provided the fuse and amplifier requirements still match.
Who Should Skip It
This kit is more than many simple systems need. Drivers running a modest amplifier, a small powered subwoofer, or a basic speaker upgrade may find a 4-gauge or 8-gauge kit easier to route and easier to fit into smaller amplifier terminals. Thick 1/0-gauge cable takes up more space, needs larger terminals, and can be harder to bend through tight factory channels.
The short ground cable is another point to check. At 3 feet, it works well when a clean, solid ground point sits close to the amplifier. In a larger vehicle, or where the amplifier sits far from a suitable ground, an extension may be needed. Buyers should also confirm that the amplifier terminals accept 1/0-gauge cable, or plan for suitable reducers and terminals.
How It Compares With Other Wiring Kits
The main choice comes down to gauge, conductor material, and system rating. Lighter 4-gauge or 8-gauge kits suit lower-power amplifiers and smaller vehicles, and their thinner cables are easier to route and terminate. They can be a better fit for a first installation, a compact car, or a system where the amplifier rating sits well below the level this Skar Audio kit supports.
Copper-clad aluminum kits offer another contrast. They often use the same outer gauge, but the aluminum core with a copper coating does not conduct as well as oxygen-free copper of the same size. That difference matters most in high-power systems. Within the Skar Audio range, the 4-gauge OFC kit suits systems up to 1,500 watts, while the 4-gauge CCA version suits systems up to 1,200 watts. The 1/0-gauge kit doubles the upper rating of the 4-gauge OFC kit. For a high-power build, that extra capacity is the point. For a modest build, it is extra bulk without a matching benefit.
FAQ
Is the Skar Audio SKAR0ANL-OFC suitable for a 3,000-watt system?
Skar Audio rates this kit for systems up to 3,000 watts, including the 1/0-gauge oxygen-free copper power and ground cable and the 300 Amp ANL fuse. Buyers should still check the amplifier manual for its recommended wire gauge and fuse size, and confirm that total system demand fits within the kit rating.
What cables are included in the box?
The kit includes a 17-foot 1/0-gauge power cable, a 3-foot 1/0-gauge ground cable, a 17-foot 2-channel twisted-pair RCA cable, a 17-foot remote turn-on wire, and 20 feet of 12-gauge speaker wire. It also includes an in-line ANL fuse holder, a 300 Amp ANL fuse, wire loom, ring terminals, and zip ties.
How long is the ground cable, and does that matter?
The ground cable is 3 feet long. That length works well when the amplifier sits near a clean, unpainted metal ground point on the vehicle chassis. If the nearest suitable ground point is farther away, the installer may need a longer ground cable or an extension, so the ground location should be planned before installation begins.
Does this kit work with more than one amplifier?
It can support a multi-amplifier setup when combined system demand stays within the kit rating and wiring is split correctly. A distribution block, additional fusing, and correct gauge wiring for each amplifier may be needed. For a complex build, plan the power distribution in advance and follow each amplifier manual for fuse and wiring guidance.
Final Verdict
The Skar Audio 1/0 Gauge OFC Complete Amplifier Installation Wiring Kit, SKAR0ANL-OFC, is a complete and capable choice for a powerful car audio installation. Its thick oxygen-free copper cable, 17-foot power run, twisted-pair RCA cables, and 300 Amp ANL fuse cover the parts that matter most for stable power delivery, and the included speaker wire, remote wire, loom, and terminals make it a practical single-box solution.
It is not right for every build. The heavy cable needs space and suitable terminals, and the 3-foot ground cable may not suit every layout. For a modest amplifier, a lighter kit will be easier to install. For a powerful system that needs low-resistance wiring and room to grow, this Skar Audio kit is a solid match.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!